When you are in need of an honest, reliable service that provides 100% satisfaction for our customers please call the Seattle Appliance Repair Company at 206-436-4649 or schedule online and receive a discount.
Seattle Appliance Repair Service team can get to you quickly to carry out efficient and cost effective appliance repairs.
Flexible Appointment Times:
Seattle Appliance Repair Service. will work on your schedule, you don't have to sit and wait for us to show up.
We can call you on your mobile or work phone and give you plenty of time to meet us for a fast appliance repair in Seattle and surrounding areas.
Our trucks are fully stocked, so almost all service calls can be completed in the same visit.
Reliable Appliance Service:
Seattle Appliance Repair guaranties your satisfaction.
Same Day Appliance Repair
Gas Oven Repair
|Sometimes the power cord disconnects at the dishwasher (behind the bottom kick panel). If this happens, the wiring must be replaced or repaired. ||Door switch – must be replaced if defective. |
|Make sure there is water to the dishwasher. Check water shut-off valve, water valve. Check spray arms, unclog if necessary. ||For best results, water temperature inside dishwashers should be at least 120 degrees when filling dishwasher. Make sure to use enough soap.|
|Film on dishes and glasses. This is caused by excessive calcium build up. Clean dishwasher with dishwasher cleaner. ||If dishwasher isn’t draining, make sure the air gap isn’t clogged. Also make sure drain hose isn’t clogged. |
|Check to make sure belt on pump isn’t broken. A broken belt will prevent the dishwasher from draining. ||Check pump(s) to make sure there are no broken pump components. |
|Gas Dryers Repair|
|Replace the door switch if defective or broken. ||Make sure thermal fuse has not burned out or stopped heating. Before replacing, make sure blower wheel is not broken or clogged and that venting is not blocked.|
|If the igniter glows, then shuts off without igniting gas – the coils are probably defective and should be replaced. ||Igniter may burn out or break and should be replaced if this happens. |
|If it takes too long to dry make sure dryer vent hose and duct isn’t clogged. ||Check cycling thermostats inside dryer. If one breaks it might affect performance. Replace if defective. |
|Electric Dryers Repair|
|If there’s no heat check for tripped breakers or blown fuses. Electric dryers use two and if one is tripped it may still run but not heat.||Heating element may be burned out. Replace if defective. |
|Make sure thermal fuse has not burned out or stopped heating. Before replacing, make sure blower wheel is not broken or clogged and that venting is not blocked.||If it takes too long to dry make sure dryer vent hose and duct isn’t clogged.|
|Test thermostats and replace if found to be defective. ||Replace any heating element found to be defective. |
|Washing machines may not work if their lid switch is defective. It is usually located near the door and will need to be replaced if defective. ||If washer drains and fills at same time drain hose might be too low. Drain hose should be at least 3 feet above floor.|
|A clogged drain will keep water from draining,. ||A water pump may have a frozen pulley or broken impeller and should be replaced. |
|If there isn’t any hot water, make sure the hot water is turned on.||If there isn’t any cold water, make sure the cold water is turned on. |
|Gas Ranges/Ovens Repair|
|Make sure the burners are cleaned and not clogged. Pilotless models are not easy to test and to find out what is defective. Call a professional if your burners aren’t working.||Check and make sure oven igniter is not weak or burned out by checking to see if it glows at all. If it doesn’t replace the igniter. |
|Check and make sure broil igniter is not weak or burned out by checking to see if it glows at all. If it doesn’t replace the igniter. |
|Electric Ranges/Ovens Repair|
|If element is only working partially or not at all, it might be burned out receptacle. Replace both receptacle and the element.||Check the infinite switch (located behind control panel) Replace if defective.|
|Ovens and broilers not working should have their heating element repaired if they are defective. |
|Range Hoods Repair|
|If range hood has a fan only and no light or other feature, check to make sure the fan switch isn’t broken. Replace if broken.||If range hood has a fan only and no light or other feature, check to make sure the fan motor isn’t broken. Replace if broken.|